翻訳と辞書 |
Mantelli Parma : ウィキペディア英語版 | Mantelli Parma
The Mantelli Parma was a simple, light weight, single seat glider built in Italy and first flown in 1947. Only one was constructed. ==Development==
The single example of the Parma glider, one of many glider designs from Adriano Mantelli, was built in 1947 in the workshops of Mantelli's Alaparma SpA〔 by Emilio Pastorelli during his spare time.〔 It was intended to be light, simple and cheap to build and easy to transport, whilst flying well in thermals. It had a cantilever high wing mounted on top of its fuselage and constructed in one piece to keep the weight very low. The wing had a single spar, with plywood skin forward around the leading edge forming a torsion resistant D-box. In plan the wing was rectangular with rounded tips.〔 The Parma had an smoothly plywood skinned, oval cross-section fuselage, with its cockpit under the wing leading edge and enclosed by a single piece transparency. The fuselage tapered rearwards, where a straight edged, round tipped tailplane mounted on top of the fuselage carried elevators with a cut-out for rudder movement. The fin and rudder were rounded, the latter of broad chord and reaching down to the keel. The glider landed on a sprung skid reaching from the nose almost to the wing trailing edge, assisted by a small tail bumper.〔 Mantelli flew his glider on its first flight in 1947, aerotowed by the AM-9, a two seat motor-glider〔 and another of his designs.〔 The Parma proved to be a useful trainer and could use weak thermals; it could also, despite its single piece wing, be transported behind a bicycle. To remove the wing for transport required the removal of just three bolts.〔
抄文引用元・出典: フリー百科事典『 ウィキペディア(Wikipedia)』 ■ウィキペディアで「Mantelli Parma」の詳細全文を読む
スポンサード リンク
翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|